-
Clean the wall surface: Before applying your decals, make sure to clean the wall surface to remove any dust, dirt, or debris. This will help the decals adhere better and look smoother.
-
Measure and mark the placement: Measure and mark the placement of your decals on the wall using a ruler or a level to ensure proper placement.
-
Use a transfer paper: Use a transfer paper to transfer the decals onto the wall before removing the backing paper. This will help you position the decals more accurately.
-
Start at the center: Begin applying your decals at the center and work your way outwards to ensure even placement.
-
Use a scraper or credit card: Use a scraper or a credit card to smooth out the decals and remove any air bubbles.
-
Take your time: Don't rush the application process. Take your time and be patient to ensure the decals are applied smoothly and evenly.
-
Use a hair dryer: If you have trouble removing air bubbles, try using a hair dryer to heat up the decal and smooth it out.
-
Use a blade to trim excess: If the decal is larger than the wall surface, use a blade to carefully trim off the excess.
-
Avoid placing decals in high humidity areas: Avoid placing decals in areas with high humidity, such as bathrooms or kitchens, as the humidity may affect the adhesive and cause the decals to peel or fall off.